HQ:NSC18/No Al
Soft Tapping Mode AFM Probe
AFM probes of the HQ:NSC18 series are suitable for soft tapping and Lift mode operation AFM (e.g. EFM and MFM) since they provide high stability in tapping mode as well as high sensitivity to magnetic and electric forces that may be weak. These AFM probes are also used for mapping of materials properties in Force modulation mode and true topography imaging of soft samples in Soft tapping mode.
The HQ AFM probes offer high consistency of the AFM tip radius, the AFM cantilever reflectivity and the quality factor.
Coating
none
AFM Probe Specifications
AFM Tip
| Shape | Height | Full Cone Angle | Radius |
|---|---|---|---|
| Shape Rotated | Height 15 µm (12 - 18 µm)* | Full Cone Angle 40° | Radius < 8 nm |
AFM Cantilever
| Cantilever | Shape | Force Const. | Res. Freq. | Length | Width | Thickness |
|---|---|---|---|---|---|---|
| Cantilever Cantilever A | Shape Beam | Force Const. 2.8 N/m(1.2 - 5.5 N/m)* | Res. Freq. 75 kHz(60 - 90 kHz)* | Length 225 µm(1 - 230µm)* | Width 27.5 µm(24.5 - 30.5µm)* | Thickness 3µm(2.5 - 3.5 µm)* |
* typical values
